EDMfluid® S series is formulated with synthetic paraffinic hydrocarbons with a very narrow distillation range. They are approved and recommended by the main manufacturers of EDM machine tools.
The range of the synthetic dielectric fluids for plunge electro-erosion consists of six viscosimetric degrees containing special additives aimed at favoring the formation of the ionization channel.
| Name | cSt a 20°C | Description | |
| EDMfluid® 80-S | 1,83 | Synthetic hydrocarbon fluid for sinker EDM operations with final roughness below ra 0.8 µm. Double hydrogenation. |  |
| EDMfluid® 95-S | 2,36 | Synthetic hydrocarbon fluid for sinker EDM operations with final roughness below ra 0.8÷1.6 µm. Double hydrogenation. | |
| EDMfluid® 108 MP-S | 3,0 | Synthetic hydrocarbon fluid for sinker EDM operations with final roughness below ra 1.0÷3.2 µm. Double hydrogenation. | |
| EDMfluid® 113-S | 4,10 | Synthetic hydrocarbon fluid for sinker EDM operations with final roughness below ra 3.2÷5.0 µm and blind deep cavities. Double hydrogenation. | |
| EDMfluid® 115-S | 5,1 | Synthetic hydrocarbon fluid for sinker EDM operations with final roughness below ra 3.2÷5.0 µm and blind deep cavities. Double hydrogenation. | |
| EDMfluid® 78 | 2,0 | Synthetic hydrocarbon fluid for sinker EDM operations with final roughness below ra 0.8÷1.6 µm. Mono-hydrogenated. | |
In FLUSIN® series the gradations 07 and M are formulated with synthetic paraffinic hydrocarbons, while the other ones are formulated with conventional hydrocarbons.
| Name | cSt a 20°C | Description | |
| Flusin® E | 1,8 | Conventional hydrocarbon fluid. | |
| Flusin® L | 2,1 | Conventional hydrocarbon fluid. | |
| Flusin® M | 2,95 | Multipurpose mono-hydrogenated synthetic fluid. | |
| Flusin® HV | 6,0 | Conventional hydrocarbon fluid. | |
| Flusin® 07 | 2,2 | Conventional hydrocarbon fluid. | |
| Flusin® 08 | 2,2 | Conventional hydrocarbon fluid. | |
